To achieve the finished water (domestic water Authentic Josh Jacobs Jersey , process water or waste water) water quality requirements for raw water (raw water) process.
1 processing of raw water or industrial water for a living when called to the water.
(2) processing wastewater, called effluent. The purpose of wastewater treatment for wastewater discharge (into the water or land) or re-use (see waste disposal, waste water reuse).
In the water recycling system and recycling of automatic self-cleaning filter, raw water is waste water, finished water is water, process water and wastewater treatment both to the nature. Treatment also includes processing the resulting wastewater and sludge treatment and final disposal, treatment and sometimes exhaust emissions. Water treatment methods can be summarized in three ways: The most common is through the partial or total removal of impurities in raw water to obtain the required water quality in the raw water by adding new elements to obtain the required water quality, the processing of the raw water is not involves removal of impurities or add new ingredients problems.
Impurities and contaminants, including water treatment mix of coarse material, suspended solids, colloids and solutes. Coarse material such as plants floating in the river, garbage, large aquatic organisms, waste water and large dirt and other grit. Water supply project, the coarse impurities from the water intake structures, facilities, removal, treatment is not included in the scope.
Wastewater treatment to remove coarse impurities are generally part of the water pretreatment. Suspended solids and colloids, including sediment, algae, bacteria, viruses, and the existing water treatment process and the resulting insoluble substances. Solutes are inorganic salts, organic compounds and gases. Treatment to remove impurities in the water, the main scope of the method can be roughly divided according to size of impurities. As the impurities contained in raw water and finished water can be allowed on the type and concentration of impurities in very different, the treatment process varies widely.
In terms of the domestic water, water from the high-quality raw water, finished water is only disinfected; from the original general river or lake water, first remove the turbidity caused by sediment and other impurities, and then disinfected; more polluting raw water , need to remove organic matter and other pollutants; containing iron and manganese in raw water, the need to remove iron and manganese. Domestic water quality to meet the general requirements of industrial water, industrial water, but sometimes the need for further processing, such as softening, desalination and so on.
When wastewater discharge or reuse of the water quality requirements are lower, just use methods such as screening and sedimentation to remove coarse impurities and suspended solids (often called primary treatment); When asked to remove organic matter, usually in the primary treatment used after biological treatment and disinfection; after biological treatment of wastewater, the process carried out collectively referred to tertiary treatment or advanced treatment, such as when the waste water discharged into the need to prevent eutrophication of water bodies for the removal of nitrogen and phosphorus during that belongs to tertiary treatment. When the wastewater as a water source, the product water quality requirements and the corresponding manufacturing processes with its uses. In theory, the modern water treatment technology, the system can be obtained from any poor-quality water of any quality finished water.
The following is a list of patterns that many visitors follow, and you can use these suggestions to better your site.
1. Your visitors often stay for less than 30 seconds. This is a very bad sign! There are a multitude of solutions for this. Often when a visitor leaves that fast, it's because something almost "forced" her (the average e-consumer is in fact a woman!) to leave. Frequent causes of this are ugly sites! I use the term ugly because many ugly sites are bringing in more money than you can imagine, but truley ugly sites, or ones with very hard to read obnoxious text will force a visitor away.
Your site may load far too slow! If your site loads slower than 20 seconds, you are literally driving away a third of your traffic. By the time the rest of the traffic gets there, they will be fearful of clicking a link because the same load times may apply there too!
Improper image loading or garbled code can also apply, but another factor is AD clutter! AD clutter is when you have simply too many ads in comparison with actual content. If people think your site is selling a product so awful that you have to rely on mounds of ads to survive, then they won't be ready to buy from you!
2. Your links get more traffic than your content pages! See reason one for possible solutions, as this trend often means that your links are looking more promising than the rest of your site to your visitors!
3. Your visitors hardly ever return! This one is harder to fix, but just as important as the ones earlier. If you can at all, give away a free product or sample in exchange for an email address, and use that adress for follow up emails, to keep the visitor aware of your services.
Many potential customers won't come back because they don't have a reason too! Update your site with meaningful information, or considering adding a messageboardforum.
That's all for now, see part 2 for more information!